Description

Submersible Inline Pumps
Features
• Pumps fresh and sea water.
• Rapid diesel refueling and transfer with no spillage (models iL500Plus, iL280Plus,
iL200Plus and iL120Plus only).
• Bilge pump-out in tight areas.
• Water transfer; deck showers; deck, anchor & general wash-down.
• Robust, slim line with clip-on easily cleaned filter

Dimensions

Length 165mm

Diameter 38mm

Cable length 4mtr

Instructions
Fit a length of appropriate size hose (see specification table for details) to the outlet nozzle and
immerse the complete pump in liquid. Connect the battery clips to the battery terminals (+) positive
to (+) positive and (—) negative to (—) negative (if powering from a car or boat battery do not use
with engine running). The pump will deliver immediately.
For an in-line installation unclip the filter to expose the inlet nozzle. Connect a length of hose
between the tank and nozzle. The pump must be fitted below the tank.
• Avoid dry running for long periods.
• For drinking water applications sterilize regularly.
• Store away from excessive heat and direct sunlight to avoid external damage.
• If the pump fails to perform, check for blockages (including filter), leaks and correct hose &
electrical connections.