Images are for illustration purposes and may not reflect the exact spec or size of this product/system.
240v Booster Pump – XL80
Designed to boost the pressure of your water supply, ideal for use with 40″ reverse osmosis filter systems.
- 38m max head
- 50 Lpm max flow
- Self-priming, suction up to 8m
- 230 Volt – 0.8 Hp – 3.8 Amps
- Stainless steel body & flange
- 1″ female pump inlet
- 1″ female pump outlet
- Carbon ceramic mechanical seal
- Noryl impeller
- For clear water up to 35°C
- Continuous duty
£184.37 ex VAT £221.24 inc VAT
ex VAT
- Description
- Additional information
Description
Mains powered booster pump used to increase water pressure from your water supply to your filtration system, reverse osmosis (R/O) filtration systems require a minimum water pressure to run efficiently (minimum 60PSI) R/O membranes perform on pressure and should have a rejection rate of between 95 and 98% if optimum pressure is not used R/O membranes are unable to discard total dissolved solids (TDS) from the membrane reducing the membranes performance (increasing running costs) and in some cases fouling the membrane altogether. As long as the pump has a good water feed this pump should boost your water pressure to around 80/90 psi.
- 1″ Female inlet & outlet ports
- 38m max head
- 50 Lpm max flow
- Self-priming, suction up to 8m
- 230 Volt – 0.8 Hp – 3.8 Amps
- Stainless steel body & flange
- 1″ female pump inlet
- 1″ female pump outlet
- Ceramic graphite mechanical seal
- Stainless steel impeller
- For clear water up to 35°C
- Continuous duty
INLET Booster pump comes complete with 1 meter of 3/4″ Hose on the with a quick release GF tap connecter
OUTLET 12mm hose barb to accommodate normal 1/2″ garden size hose pipe
Additional information
| Weight | 55 kg |
|---|---|
| Dimensions | 20 × 18 × 35 cm |
