Description

Horizontal Compact short swing liquid level switch sensors.

High and low level switching

N.O./N.C. SPST output

Mounted on the side wall of the tank using a 20mm hole saw

Body material is acetal and float is polypropylene

The LCS series of point liquid level switch demonstrates a high degree of reliability due to the use of non-reactive wetted components and a unique reed switch designed specifically for level sensing applications. The sensor utilizes a moving float with an embedded magnet to activate a reed switch located in the sensor body. As the liquid level raises the float, it moves a magnet into close proximity of the reed switch and actuates it to give an open contact or closed contact switch indication. The reliability of this sensor results from a very simple operating principle, a single moving part, media compatible wetted materials, and a unique reed switch design that has a UL recognized component certification. The sensor quickly mounts into the side wall of a liquid storage tank using a unique push fit design. This is an external configuration. The output is a simple N.O. or N.C. SPST reed switch that utilizes Ruthenium contact points for reliability. Changing from a N.O. output to a N.C. output is done by rotating the switch 180° in the mounting hole. This change can be done in the field. Electrical outputs are a single pair of wires with PVC insulation and a length of 0.5m, or one of three optional integrated connector designs.

Features

? Voltage rating up to 250VAC

? Current rating up to 1.0 amp

? Compact design and low profile

? Cable or integrated connector

? Rapid Push Fit Installation

? EPDM Sealing Gromme

Applications

? Water storage tanks

? Full and/or empty detection

? Pump on/off controls

? Marine bilge and ballast tanks

? Flood detection and prevention

? Coolant level indication

? Livestock watering tanks

? Irrigation systems

? Water treatment plants