Description

Product Description:

Prolong the life of your resin by reducing the risk of higher TDS water hitting the resin vessel. After the main 5 minute R/O flush, an additional 3 minute flush is introduced before the product water is passed through the DI vessel.

When the controller flushes the waste water by activating the flushing solanoid, a small amount of higher TDS water can flow through your resin media reducing its life span. The DI Saver has another valve shutting off the route of water to the DI filter when the system is flushing, increasing the life of your resin media.

The V16 Auto Flush and Fill Control + DI Saver is designed for controlling standard current pumps of up to 15A (peak) powered by +12v Leisure Battery.

Allows you to vary the pump flow rate from 0-100%.

Separate On Off Button

Pump Protection

Polarity Protection

Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead end has been removed.

Indicates When the pressure switch on the pump has been activated

Indicates the battery condition (voltage)

Start filling Cycle at the touch of the button with automatic shut off facility

Automatic Flushing Cycles of the RO membranes at the start and during the filling process, reducing Resin usage and increasing the life of the RO Membrane

Includes single Manual flush button at the touch of a button

+ DI SAVER

When the control flushes the waste water by activating the flushing solanoid a small amount of higher TDS water can flow through your resin media reducing its life span. The DI Saver has another valve shutting off the route of water to the DI filter when the system is flushing, increasing the life of your resin media.