Drone Cleaning Van Install Video

We provided all the ground based equipment needed to feed this commercial cleaning drone, all equipment was installed into a Peugeot Boxer L3 van.

With this setup the customer can offer hot or cold water high pressure cleaning alongside hot or cold water chemical soft washing. We provided an onboard chemical mixing station allowing accurate dillution of the chemicals. A long range remote controller can be used to isolate the water from either of the pumps, or from the chemical/soap feeds, easily swapping between chemical and rinsing modes.

Over 160m total length capacity available on the hoses, fed from our wide electric hose reels. 

We also provided a number of our portable electric hose reels which can act as a tether for the drones with up to 60 meters of hose available for vertical cleaning heights.

As part of this setup, we also provided our 45ltr portable chemical spraying trolleys, these can be used in areas where the drone cannot fly.

If you are interested in an install for similar equipment, contact our team on 0115 9394444 to discuss your requirements further.