
2000GPD Static 4-Stage 40" R/O Filtration system with automated Fill & Flush functionality.
Please be aware, in order to run the full filtration system effectively a fill pressure of 60psi and over is required. Less than 60psi will damage the R/O membrane and slow filtration time. To counteract this problem a booster pump will be required. To test your mains pressure we sell pressure testing kits for £15 +VAT, Booster pumps and testing kits can be found in the filtration section.
(2000 Gallons per Day / 9,500ltrs per Day)
This 4-stage portable R/O system is the ultimate in pure water filtration, designed for those that want hassle free and low day to day maintenance to produce bulk water on a massive scale and in the shortest time possible. This system offers filling times of around 200ltrs an hour based on an average household tap pressure. Comes complete on an Aluminium frame housing all components designed to stand on the floor.
This systems comes with our automated flush and fill functionality, this fully automates the flushing of your membrane (at the start of the cycle and also every hour for 2 minutes), complete shutoff of water when your tank is full. This system also offers the functionality to control a 240v booster pump, essentially the systems turns the booster pump on while filling, then when the tank is full it kills the power to the booster making sure it will never burn itself out.
One of the great features of this system is the fact that you do not need to manually start the filling process everyday, as this system will detect when you start to take water out of your holding tank, and will instantly start to produce pure water until the tank is full again. With this feature you can pretty much guarantee you have a full tank of pure water ready to go all the time.
As with all reverse osmosis filter system, the higher the tap pressure from your water source the better this system will run, as this helps to produce water quicker and to also keep your running costs lower over time. Ideally this system needs to have a tap feed of around 60-90psi. Most UK households have poor tap pressure (less than 50psi) causing fill times to be slower and to increase running costs. We always recommend if you have a feed of less than 50psi then a booster pump will be needed to boost up the pressure. We can supply all of our filtration systems with a booster pump if needed.
What’s Included:
Key features:
Volume:
These systems are designed to run for long periods and produce up to 9,500 litres of pure water a day.
Multiple Vehicles:
By having a static system will allow multiple vehicles to draw pure water from the system on tap sharing running costs and without the need to purchase a filtration system for every vehicle.
Water Usage:
Static systems will allow you to use more than one fill of water per day, where van mounted filtration systems would simply take too long to produce a second fill of water to return out to work on the same day.
Vehicle Size:
By having the option of refilling the tanks throughout the day gives the option of having a smaller tank in a smaller vehicle.
Van Downtime:
It takes several hours to produce water by the method of reverse osmosis therefore having a static filtration system will allow you to use the vehicle in the evenings when van mounted systems would usually be connected to a tap supply for several hours during the filling process.
Running Costs:
On average you will find your annual running costs to replace the filters inside this system will cost less than £150 per year. Essentially you have to replace the 2 pre-filters every 3-4 months (as these help to keep the main R/O membrane cleaner over time), you then replace the resin inside the D/I vessel as and when your water is no longer pure enough to clean windows (we change ours when our TDS level reaches 004ppm). The main 40” R/O membrane should last around 3-5 years on average.