



Images are for illustration purposes and may not reflect the exact spec or size of this product/system.
V16 Auto Flush & Fill 12v Pump Controller
V16 Auto Flush Fill Pump Controller – Automatically control the flushing and filling of your reverse osmosis system.
FYI – This controller ships with an electronic shutoff valve for your water tank, you will need to purchase the Xline Auto Flush & Fill Solenoid box seperately.
£170.67 ex VAT £204.80 inc VAT
ex VAT
Product Documents
- Description
- Additional information
Description
The V16 Auto Flush and Fill Control is designed for controlling standard current pumps of up to 15A (peak) powered by +12v Leisure Battery.
- Fills your tank automatically
- One time fill or continuous (on demand) fill
- Automatically flushes your RO membrane
- Single or hourly flushing selectable
- Easy to use and simple to install
- Copes easily with demanding daily use
- Extends life of resin cartridges
- Controls water flow accurately (0-99) and dependably
- Advanced micro Dead End detection and retesting
- Accurate battery voltage testing
- Low battery cut off override function
- Unit is sealed to IP65, stopping water ingress
- Supplied with full wiring kit, fuses and fuse holders, electronic float level switch (horizontal or vertical), and full instructions.
- You will need to purchase our Auto Fill & Flush Solenoid box seperately to fully utilise this controller.
This controller can be used as part of your RO process or to fill water tanks in your vehicle. Press a button to open the solenoid valve and start the water fill. When the water reaches the required level the level switch is activated and the controller closes the solenoid valve, thus stopping the fill. The controller also flushes your membrane automatically and can be set to do this at the beginning of each fill or hourly. The controller comes with all the market leading functionality of our standard digital controller.
Suitable for systems with or without booster pump fitted.
Water Pump Features:
Allows you to vary the pump flow rate from 0-100%.
Separate On Off Button
Pump Protection
Polarity Protection
Automatically pauses the flow when dead-end (eg from a pole valve) is detected and restarts it when dead end has been removed.
Indicates When the pressure switch on the pump has been activated
Indicates the battery condition (voltage)
Start filling Cycle at the touch of the button with automatic shut off facility
Automatic Flushing Cycles of the RO membranes at the start and during the filling process, reducing Resin usage and increasing the life of the RO Membrane
Includes single Manual flush button at the touch of a button
Additional information
| Weight | 0.8 kg |
|---|---|
| Dimensions | 10 × 8 × 15 cm |





















